ASL INTERCOM Enchorus ENC 1201 - Right Part of the Function Bar

Conguring the Unit via its Web Interface
Function Bar
ENC 1201 Version 1.0 Page 18
4.2.2 RightPartoftheFunctionBar
Factory Reset
This function allows you to restore the ENC 1201’s factory settings (also called “initializ-
ing”).
Careful:
• Restoring the factory settings overwrites the conguration stored inside the unit. It is recom-
mended to back up the ENC 1201’s current conguration settings to your computer (see “Down-
load Cong”, p.17) before initializing it.
1. Click [Factory Reset] to open the following window:
2. Click [OK] to conrm this command (or [Cancel] if you don’t want to proceed).
If you conrm, the ENC 1201 reboots and restores the factory settings.
Reboot
If, for some reason, the ENC 1201 needs to be restarted, click [Reboot]. If you do, the fol-
lowing conrmation dialog is displayed:
Click [OK] to conrm this command (or [Cancel] if you don’t want to proceed).