ASL INTERCOM Enchorus ENC 1201 - 6 Enchorus ENC 1201 Specifications

Enchorus ENC 1201 Specications
ENC 1201 Version 1.0 Page 52
6 EnchorusENC1201Specications
Dimensions
Width [mm] 220
Length [mm] 255
Height [mm] 44
Weight [kg] ±1.7
ElectricalSpecications
Supply voltage 100~240VAC
Dante
Sample rate 44,1 kHz / 48,0 kHz / 88,2 kHz / 96 kHz / 176,4kHz /
192 kHz
Word length (sample depth) 16 bits/24 bits/32 bits (transparent)
MicrophoneInputs(XLR)
Input type Electronically balanced
4-way splitter on each input
Phantom power +48V, switchable for each MIC IN
Input impedance 5.56kΩ
Max. input level +24dBu
Idle-channel noise –152dBFS (A) (typical)
Frequency response 20Hz~22kHz (Fs= 48kHz)
20Hz~40kHz (Fs= 96kHz)
Signal-to-noise ratio >152dB (A) (typical)
THD+N –98dB (<0.0012%)
Common-mode rejection ratio 100dB (typical)
LineOutputs(RJ45)
Ouput type Electronically balanced
Max. output level +24dBu
Output impedance 0Ω (typical)
Idle-channel noise > –95dBFS (A) (typical)
Frequency response 20Hz~22kHz (Fs= 48kHz)
20Hz~40kHz (Fs= 96kHz)
Signal-to-noise ratio >119.5dB (A) (typical)
THD+N < –98dB (<0.0012%)
Interchannel crosstalk (output to output) < –98dBr (@15dBu), < –103dBr (@24dBu)
Ambient Conditions
Ambient temperature [°C] 15~65
Relative humidity [%] <80