Assa Abloy ACCENTRA 6000 Series - Electrolynx Wiring System

1. Overview
I. ElectroLynx Wiring System
Important:
Do Not Force - ElectroLynx connectors plug and lock together in only one way. See Figures 6 & 7.
NOTE:
 Devices ordered with “S”, “B”, “O” and MELR Options wired in Timer Mode require all 12 wires.
 The 3” Harness is not included with the product, door or hinge and must be ordered separately.
Figure 6 - ElectroLynx Connections
Figure 7 - Typical ElectroLynx Wiring
Locking Mechanism
Receptacle
Plug
Provided With Product
Typical ElectroLynx Wiring Harness Connections
4-pin F8-pin F
8-pin F
8-pin F
4-pin M
4-pin F
4-pin M
3" Harness
8-pin M 8-pin M
8-pin M
McKinney QC12 Hinge
(Available direct from McKinney)
1-855-577-5078 Ext. 2 • www.accentra-assaabloy.com
6000 Series MELR
Exit Devices
Installation Instructions
8
80-8150-0077-000 04/24
Copyright © 2017, 2023, 2024, ASSA ABLOY ACCENTRA™ Access and Egress Hardware Group, Inc. All rights reserved. Reproduction
in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.