2.41 STTEXT4 [20H 48H]: TeleText data registration
Function: This command registers the TeleText data of the designated program
number. When the program number is 0, it writes the data into the buffer
RAM. When it is 9999, it writes the data into the command work RAM.
Sequence: Type 2
Command:
“0” = OFF, “1” = Default, “2” = Select
Data output line, line 10
Data output line, line 11
Data output line, line 12
Data output line, line 13
Data output line, line 14
Data output line, line 15
Data output line, line 16
Data output line, line 17
Data output line, line 18
Data output line, line 19
Data output line, line 20
Data output line, line 21
Data output line, line 22
Data output line, line 23
To Next Page
Loading...
