2.123 LHECA4 [20H AEH] :HDCP, EDID, CEC, HDMI ARC
ON/OFF data aquisition
Function : This command gets HDCP, EDID, CEC, HDMI ARC ON/OFF data of the indicated
program No. In case program NO.1001 to 2000, the VG original data is read out. In
case ,NO.9999, the data is read out from command work RAM.
Sequence : TYPE 3
Command ：
Fig 2-123-1
Data ：
Fig 2-123-2
* The data configuration is shown below.
Low=Off, High=On, Bit4 to 7 are fixed.
*This command is only for VG-883.
ACK or
STX+ESTS+ERROR CODE+ETX
To Next Page
