ASTRO VG-877 - LDVIM [6 CH]: DVI Output Mode Readout

Chapter 4 INDIVIDUAL FORMATS FOR CONTROL COMMANDS
413
4.64 LDVIM [6CH]: DVI output mode readout
Function: This command reads the DVI mode of the designated program number.
Sequence: Type 3
Parameters:
STX
1 byte
02H
LDVIM
1 byte
6CH
Program number
1 to 3 bytes
“0” to “999”
ETX
1 byte
03H
Fig. 4-64-1
Data: Same as Fig. 4-63-2.