21
3.2 Adaptive QoS
This feature ensures bandwidth for prioritized tasks and apps.
To configure Adaptive QoS:
1. From the navigation panel, go to General > Adaptive QoS >
QoS.
2. From the Enable QoS pane, click ON.
3. Select the QoS Type (Adaptive QoS, Traditional QoS or
Bandwidth limiter) for your configuration.
NOTE: Refer to the QoS tab for the definition of the QoS Type.
4. Click Automatic Setting for optimal bandwidth automatically
or Manual Setting to set the upload and download bandwidth
manually.
NOTE: Get the bandwidth information from your ISP. You can also
go to http://speedtest.net to check and get your bandwidth.
5. Click Apply.
To Next Page
Loading...
