AT&T SB67108 - AT&T User Manual

Getting started
Add and register desksets
The handset provided with your SynJ SB67138 is already registered as
Handset 1. Additional desksets are assigned numbers in the order they are
registered (Deskset 2 to Deskset 10).
Start registration when the handset screen shows Press
MENU on MAIN base, select Registration & then Register
HS. Then press Start.
To register a deskset to your telephone base
1. The SynJ SB67148 deskset shows Press MENU on Main
base, select Registration & then Register HS. Then press
Start. before you begin registration.
2. On the main telephone base, press MENU/ENTER.
3. Scroll down to Registration and press MENU/ENTER.
4. Press MENU/ENTER again to select Register HS.
5. Press the Start softkey on the unregistered deskset. The
telephone base screen shows Registering new device...
It takes up to 60 seconds to complete the registration.
You hear a beep when the registration is successful.
The telephone base shows Deskset registered and the
deskset shows X:Deskset X (X represents the extension
number [1-0]; Deskset X represents the deskset name).
NOTE: If the registration is not successful, the telephone base screen
displays Registration failed with an error tone. Try the registration
process again.
Press MENU on
MAIN base, select
Registration &
then Register HS.
Then press Start
SB67138:
SB67148:
COVM
Speed dial setup
Customer support
Registration
>
Registration
Deregistration
>
Registering
new device...
Deskset
registered
2:Deskset 2
Set date & time
Menu
Redial
11

AT&T SB67108 - AT&T Specifications

General

Brand	AT&T
Model	SB67108 - AT&T
Category	Telephone
Language	English