AT&T SB67108 - AT&T User Manual

Chain dialing
While you are on a call, you can initiate a dialing sequence from the
numbers in the directory.
Chain dialing can be useful if you wish to access other
numbers (such as bank account numbers or access
codes) from the directory.
To access the directory while on a call:
During the call, press DIR, then press
or to reviewto reviewreview
the directory.
To dial the displayed number, press
MENU/ENTER. To
exit without making changes, press EXIT or REP andand
continue with the conversation.
NOTE: You cannot edit a directory entry while on a call. See page 61 for more details
about the directory.
Three-way conference calls
Use this feature to set up a three-party call by using two lines at the same
time. You can also join an intercom call with a call on an outside line. The
outside line call must be established first because an intercom call cannot be
placed on hold.
To make a three-way conference call:
Make or answer an outside call.
Press HOLD and call someone on another line, or start an intercom
connection.
-OR-
Call someone on another line, or intercom someone. The
first line is automatically put on hold.
3. Press CONF at any time to begin the
three-party conference.
To talk privately with one external party:
1. Press HOLD to place both lines on hold.
2. Press LINE 1-LINE 4 to talk privately with the person on that line.
3. Press CONF to resume the conference call.
1.
2.
1.
2.
Telephone base operation
Options while on calls
CHRISTINE SMITH
8887227702
ENTER=Call
Line1 00:16:30
88324458887227702
47
Conf. 00:00:35
L1 H1
1

AT&T SB67108 - AT&T Specifications

General

Brand	AT&T
Model	SB67108 - AT&T
Category	Telephone
Language	English