Use this feature to individually select the line mode for each available
telephone line. For the system to behave properly, it needs to be set for:
a) PBX lines, which are typical business telephone systems that require you
to dial 8 or 9 to get an outside line.
-OR-
b) CO lines, which are standard residential telephone lines.
This telephone comes factory set for PBX lines.
When the telephone is idle, press MENU
/ENTER.
Press
or to scroll to Base setup. Press MENU/ENTER.
Press
or to scroll to Set line mode. Press MENU/ENTER.
Press
or to scroll to a desired line (L1, L2, L3 or L4).
Press
REP or SKIP to select PBX or CO.
Repeat Steps 4 and 5 to choose the line mode for other
lines if desired.
Press
MENU/ENTER to save the setting and return to the previous menu.
There is a confirmation tone. To exit without making changes, press EXIT.
1.
2.
3.
4.
5.
6.
7.
Use this feature to select the default telephone line to be used when you
make outgoing calls. This telephone comes factory set for Auto selectable
line, which chooses the first available line for making a call. To select a
particular line, choose Line 1, Line 2, Line 3 or Line 4.
When the telephone is idle, press MENU
/ENTER.
Press
or to scroll to Base setup. Press MENU/ENTER.
Press
or to scroll to Line selection. Press MENU/ENTER.
Press
or to select Auto, Line 1, Line 2, Line 3
or Line 4.
Press
MENU/ENTER to save the setting and return to
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
1.
2.
3.
4.
5.
Line selection
:Auto
ENTER=Save
LCD contrast
Key tone
Language
Line selection
>
Set line mode
Key tone
Language
Line selection
Set line mode
>
L1 CO
L2 PBX
L3 CO
L4 PBX
Getting started
Telephone base setup
19
Line selection
Call log
Ringer setting
Mailbox setup
Base setup
>
To Next Page
Loading...
