AT&T SB67108 - AT&T - Speed Dial Setup; Enter, Edit or Delete a Speed Dial Number; Customer Support

The telephone base has 10 speed dial locations where you can store the
telephone numbers you wish to dial using fewer keys than usual. You can
store up to 32 digits in each location.
Enter, edit or delete a speed dial number
When the telephone is idle, press MENU
/ENTER.
Press
or to scroll to Speed dial setup. Press MENU/ENTER.
Press
or to choose the desired speed dial location,
then press MENU/ENTER.
Use the dial pad to enter or edit the telephone number
up to 32 digits. If you want to delete the entry, erase all
the digits.
Press
REP or SKIP to move the cursor to the left
or right.
Press REMOVE to backspace and delete a digit.
Press and hold REMOVE to delete all digits.
5. Press MENU/ENTER to save the setting and return to
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
1.
2.
3.
4.
•
•
•
Mailbox setup
Base setup
COVM
Speed dial setup
>
Speed dial 1
Speed dial 2
Speed dial 3
Speed dial 4
>
Enter phone #:
8888832445
ENTER=Save
NOTES:
See Calling a speed dial number on page 41 for instructions on calling a speed dial number.
The memory locations for speed dial and the directory are not the same, so setting up speed dial
numbers does not decrease your directory storage space.
1.
2.
Getting started
Speed dial setup
37
Enter phone #:
8888832445
ENTER=Save
Customer support
Use this feature to display the AT&T website.
When the telephone is idle, press MENU
/ENTER.
Press
to scroll to Customer support. Press MENU/ENTER.
To exit, press EXIT.
1.
2.
3.
www.telephones
.att.com
Base setup
COVM
Speed dial setup
Customer support
>