You can dial, delete or edit a directory entry (name and number) when it is
shown on the telephone base screen. You can use the directory review or
search (pages 59-60) to show an entry.
Display dial
When a number is displayed on the screen, you can dial the number by lifting
the corded handset, pressing
SPEAKER or LINE 1-LINE 4 for the desired line.
Delete an entry
When a directory entry appears, press REMOVE on the
telephone base to delete the displayed entry from the
directory. You cannot retrieve a deleted entry.
Delete all entries
When the telephone is idle, presspress MENU/ENTER twice to select Directory.
-OR-
PressPress DIR on the telephone base.
2. Press REMOVE and the screen displays Delete entire
directory? <=No >=Yes. Press SKIP to confirm or
press REP to return to the previous screen.
NOTE: You cannot retrieve deleted entries.
Edit an entry
1. When a directory entry appears, press MENU/ENTER.
2. Follow Steps 3 to 5 on pages 57-58.
NOTE: If the telephone number in the directory exceeds 16 digits,
< appears in front of the telephone number in the editing screen.
Press REP to move towards the beginning of the telephone number
or press SKIP to move towards the end of the telephone number.
1.
Directory
Dial, delete or edit entries
61
Delete entire
directory?
<=No >=Yes
Enter phone #:
<888722770288872
ENTER=Next
To Next Page
Loading...
Need help?
General