AT&T SB67108 - AT&T - Store a Pause in a Directory Number; Store a Flash in a Directory Number

- Press REP or SKIP to move the cursor to the left
or right.
- Press REMOVE to backspace and delete a character.
- Press and hold REMOVE to erase all characters.
- Press 0 once to add a space.
5. Press MENU/ENTER to save the setting and return to the
previous menu. There is a confirmation tone. The name
and the telephone number appear on the screen. To exit without making
changes, press EXIT.
Store a pause in a directory number
Use this feature to include a pause in a number stored in the directory. You
might need a pause in a directory number to enable access to automated
telephone systems.
When you wish to enter a pause in the dialing
sequence, press PAUSE
/REDIAL to store a 3.5 seconds
pause. A P appears in the telephone number. Eachtelephone number. Each number. Each
pause counts as one digit. If you want to save the
number in the directory, press MENU/ENTER.
Store a flash in a directory number
Use this feature to store the flash needed to access certain custom-calling
services in a directory number.
When you wish to enter a flash in the dialing
sequence, press FLASH. An F appears in the
telephone number. Each flash counts as one digit. If number. Each flash counts as one digit. If
you want to save the number in the directory,
press MENU/ENTER.
•
•
Enter name.:
CHRISTINE SMITH
ENTER=Save
CHRISTINE SMITH
888 722 7702
Directory
Create directory entries
58
Enter phone #:
8887227702F
ENTER=Next