AT&T SB67108 - AT&T - Answering a Call; Temporary Ringer Silencing; Last Number Redialing

Last number redialing
The last 10 telephone numbers dialed (up to 32 digits) are stored in
system memory.
To view the 10 most recently dialed numbers:
1. Press
PAUSE/REDIAL to enter the redial list and display
the most recently called number.
2. Press or , or press PAUSE/REDIAL repeatedly to
view other recently called numbers.
3. Press EXIT to exit the redial list.
To redial a number:
To dial the displayed number, lift the handset, orlift the handset, or
press SPEAKER or HEADSET.
To override automatic line selection, press LINE 1-LINE 4
for the desired line, then lift the handset.
•
•
To override automatic line selection, press LINE 1-
LINE 4 for the desired line, then lift the handset.
NOTE: If there is no telephone number stored in the speed dial location,
No number displays on the screen.
Answering a call
To answer a call:
Lift the handset, press
SPEAKER, HEADSET or the ON/OFF button on a
registered cordless headset.
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, then lift the handset.
Temporary ringer silencing
Press MUTE while the telephone is ringing to silence the
ringer temporarily on the telephone base only. This turns
off the ringer without disconnecting the call. The next
incoming call rings normally at the preset volume.
•
Line 3
8888832445
Speed dial 4
No number
Telephone base operation
Telephone base basic operation
42
8888832445
Line1
8888832445