Atari 2600

Figure 3-1. 2600 Trigger Circuitry with Static Modification
Install the static modification on all
2600 units.
Install CR202 nd
CR203
by removing C236 and C237 and inserting the C2361CR202 and
C2371CR203
assemblies
in their place (See Figure 3-2). CAUTION:
Observe the polarity on CRZ02 and CR203 (the dark band must be toward
the 3202/3203 connectors).
On the switchboard, install the static strips as
shown in Figure 3-4.
2600/2600A Domestic VCS