15 Rev. 00
2.2 Duty
The crimping machine is designed to effect the assembly (crimping) of aluminium and PVC/iron
profiles.
Max machinable profiles sizes:
— Max profile height : max 120 mm;
— Max profile thickness (aluminium): max 3 mm;
— Max operating range of crimping heads and reference forks: from 23,5 to 63,5.
2.3 Standard Equipment
The machine is not equipped with accessories or special tools which could change her functioning.
The machine comes complete with the following accessories:
— n° 1 setscrew wrench 8 mm;
— n° 2 support profiles.
2.4 Guidelines for Safe Use
The crimping machine GAMMA is designed and constructed in compliance with the relevant CE
Directives and the safety standards there quoted.
In case of malfunctions not forseen or foreseeable in these instructions, please, contact ATLA COOP
Service, before operating with the machine. The company ATLA COOP shall not be liable for
incidental or consequential damages resulting from abuse or misuse beyond its control.
2.5 Suitable User
The user operating with the machine must have Qualification 1, in order to guarantee a good knowledge
of the correct machine operation. The above mentioned qualification can be reached through thorough
reading of these Operating and Maintenance Instructions and training by already qualified personnel.
To Next Page
Loading...
Need help?
General