ATLA COOP GAMMA - How to Clean the Machine

37 Rev. 00
7.2.1 HOW TO CLEAN THE MACHINE
Clean the whole outside surface of the machine and the pedals using soft cloth slightly dampened
with soapy water.
Clean the worktable with an aspirator in order to remove dust and scrap .
! ! WARNING ! !
Do not use any type of solvent, such us alcohol or gasoline
as they may harm the surface; do not use water jets.
7.2.2 CONDENSATE DRAINAGE FROM THE AIR REGULATOR
— The machine is in standby, connected to the dair supply: open the valve (1, fig. 7.1) in order to
release possible condensate accumulated inside the tank(2) of regulator (3).
— Close the valve.
Fig. 7.1
3
2
1