39 Rev. 00
7.2.4 HOW TO LUBRICATE THE MACHINE
— Disconnect the machine disconnecting the air pipe from the connection (quick coupling).
— Remove the fixed protective devices for access to the leverage system.
— Smear with a brush all joints with a small quantity of oil for automatic transmission (use «A.T.F.D.
II° D - PERSIAN OIL» or similar).
— With a grease gun lubricate the slideways of lower slide(1, fig. 7.3) inserting greas (we suggest
«MOBILUX EP2» or similar) into the relevant grease nipples (2)until fill them up.
— Remount the fixed protective devices.
— Open the upper safety guard.
— With a grease gun lubricate the slideways of crimping head (3), inserting greas (we suggest
«MOBILUX EP2» or similar) into the relevant grease nipples (4) until fill them up.
— Perform the same operations for the second crimping head.
Fig. 7.3
3
4
1
2
To Next Page
Loading...
Need help?
General