9 Rev. 00
1 HOW TO USE AND KEEP THIS INSTRUCTIONS
HANDBOOK
1.1 Purpose and Allocation of these Instructions
This Instructions Handbook contains the necessary instructions for the correct use and maintenance
of the pneumatic crimping machine called GAMMA.
The machine must always be accompanied by these instructions throughout its whole lifetime. In the
event that the machine is sold or given in possession of a third party, it's necessary to transfer also
these instructions together with all the other enclosed documents in order to guarantee the user's and
operator's safety.
This handbook allows to perform the following operations :
— installation
— regulation
— exploitation
— maintenance
— scrapping
This handbook is allocated both to the user and to the operator in charge of these operations. The
failure to use the machine in accordance with the instructions contained in this handbook will release
the company ATLA COOP from any liability.
The company ATLA COOP shall not be liable for incidental or consequential damages resulting
from the following circumstances :
— Abuse or misuse of the machine
— Failure to use the machine in accordance with the technical or safety standards in force in a
given country
— Installation of the machine in a manner inconsistent with the instructions contained in this
handbook
— Failure to perform the forseen maintenance
— Alteration, modification
— Replacement of not original or not specific spare parts
— Failure to use the machine in accordance with the instructions of this handbook
These instructions cannot be used as a point of reference for adaptations, changes or adjustments to
upgrade the machine from its normal purpose. If this happens ATLA COOPshall be released from
any liability. ATLA COOP shall not be liable for circumstances other than defects in materials or
workmanship.
To Next Page
Loading...
Need help?
General