Atlantic 024122 - Page 61

- "HP circulation pump": ON / ----
- "Elec. backup 1": ON / ----
- "Area 2 circulation pump": ON / ----
- "Mixing valve": Open / Close / ----
- "DHW valve": DHW / ----
- "DHW backup": ON / ----
- "Boiler connection": ON / ----
- "Boiler connection ON / Stop": ON / ----
Relay test
HP circulation pump
Elec. backup 1
Area 2 circulation pump
Mixing valve
DHW valve
DHW backup
----
----
----
----
----
----
- "Simulated Outd. T°" : -55°C... 50°C.
Outd. T° simulation
Simulated Outd. T°
---
The factory settings, stored within the controller,
will replace and delete any custom programs.
" Your custom settings will therefore be lost.
Reset factory conguration
Reset factory conguration
Some settings (or menus) might not be displayed. They are dependent on the installation's conguration (and installed options).
Auxiliary functions
Relay test
Outd. T° simulation
Reset factory conguration
Installation and Operating Manual "1821- EN" - 61 -
Alféa Extensa Duo A.I. Heat Pump