Atlantic 024122 - Auxiliary Functions

8.6 Auxiliary functions
- Choose the zone.
- Choose the "Drying type": Stop / Automatic / Manual.
- Set the "Flow T° setpoint": 0°C... 95°C.
Area 1 oor drying
Drying type
Stop
Flow T° setpoint 25°C
- Stop: The HP is operating normally (with backup if necessary).
- Start: The HP is using the backup heating or boiler connection.
Use the "Start" setting only in emergency or test mode
as your heating bill could be large.
Emergency mode
Activate emergency mode
Some settings (or menus) might not be displayed. They are dependent on the installation's conguration (and installed options).
Auxiliary functions
Floor drying
Emergency mode
Installation and Operating Manual "1821- EN"
Alféa Extensa Duo A.I. Heat Pump
- 60 -