3.7 Calling up menus
Description
Control panel
When the voltage is switched on, the Main screen is shown automatically.
‘Compr. Outlet’
bar 7.0
‘rpm’ 2500
‘Menu’
F1 F2 F3
The arrow down key (1) can be used for a quick look at the actual compressor status.
After pressing the ‘Menu’ (F1) key, the option ‘Status data’ will be followed by a horizontal
arrow:
• Either press the tabulator key (2) to select this menu,
• Or use the arrow down key (1) until the desired submenu is followed by a horizontal arrow
and then press the tabulator key (2) to select this menu.
Instruction book
24 API161475
To Next Page
Loading...
