Starting from the Main screen (see Main screen menu):
• Press the key ‘Menu’ (F1).
• Press the arrow down key (1) until ‘Modify Params’ is followed by a horizontal arrow.
• Activate the menu by pressing tabulator key (2).
• Use the arrow down key (1) to scroll until the option ‘Clock Function’ is followed by a
horizontal arrow.
• Activate the menu by pressing tabulator key (2); the following screen appears:
‘Clock Function’
‘Not activated’
.
‘Menu’ ‘Mod.’ ‘Del’
F1 F2 F3
• Press the tabulator key (2), the following screen appears:
‘Monday’
‘Tuesday’
‘Wednesday’
‘Menu’ ‘Mod.’ ‘Del’
F1 F2 F3
• Use the scroll keys (1) until the day on which a command must be programmed is followed
by a horizontal arrow. Press the tabulator key (2); the following screen appears:
--:-- ----------------------
--:-- ----------------------
--:-- ----------------------
‘Menu’ ‘Mod.’ ‘Del’
F1 F2 F3
• Press the key ‘Mod.’ (F2). The first two dashes will flash. Use the scroll keys (1) to enter 06.
Press the tabulator key (2) to jump to the following two dashes. Use the scroll keys to enter
15. Press the tabulator key to jump to the row of dashes. Use the scroll keys to enter the
command ‘Start’.
• Press the key ‘Prog’ to program the command: 06:15 ‘Start’ ‘Comp’.
• Press the arrow down key (1): the horizontal arrow indicates that the second line is
accessible. Press the key ‘Mod.’ and modify this line in a similar way to the following
command: 06:15 ‘Press Band 1’.
• Press the key ‘Menu’ (F1) and scroll to ‘Friday’:
‘Thursday’
‘Friday’
‘Saturday’
‘Menu’ ‘Del’
F1 F2 F3
Instruction book
34 API161475
To Next Page
Loading...
Need help?
General
