2 General description
2.1 Introduction
GA 30
+
, GA 37 and GA 45 are single-stage, oil-injected screw compressors, driven by an electric motor.
The compressors are air cooled.
The compressors are controlled by an Elektronikon
®
controller. GA 30
+
has an Elektronikon controller
with graphical display, while the basic version of the GA 37 and GA 45 have a basic version of the
Elektronikon controller. For the GA37 and the GA 45, the Elektronikon controller with graphical display is
available as standard option.
The controller is fitted to the right hand door panel on the front side. An electric cabinet comprising the
motor starter is located behind this panel.
The compressors are enclosed in a sound-insulated bodywork.
There are 2 versions of the compressor: Workplace Pack (without integrated dryer) and Workplace Full-
Feature (with integrated dryer).
The dryer removes water from the compressed air by cooling the air to near freezing point.
Front view, GA 30
+
up to GA 45
Instruction book
12 2920 7180 30
To Next Page
Loading...
Need help?
General
