Main screen with shut-down indication, motor overload
• Switch off the voltage and remedy the trouble.
• After remedying and when the shut-down condition has disappeared, switch on the voltage and restart
the compressor.
3.7 Service warning
Description
A service warning will appear when the service timer has reached the programmed time interval.
If the service timer exceeds the programmed time interval, service LED (9) will light up.
To display the service timer, press Scroll buttons (12) to scroll to <d.6>: the service symbol is shown.
Next, press the Enter button (13). The reading of the service timer is shown in <hrs> (or <x1000 hrs> if the
service timer value is higher than 9999).
Example of the service timer screen
The example screen shows that the service timer is at 4002 hours.
Actions to be taken:
Instruction book
2920 7180 30 35
To Next Page
Loading...
