8.5 Oil and oil filter change
Warning
The operator must apply all relevant Safety precautions.
Always drain the compressor oil at all drain points. Used oil left in the compressor can
contaminate the oil system and can shorten the lifetime of the new oil.
Never mix lubricants of different brands or types as they may not be compatible and the
oil mix will have inferior properties. A label, indicating the type of oil filled ex-factory, is
stuck on the air receiver/oil tank.
If the compressor is equipped with an Energy Recovery system, also consult
Maintenance for Energy Recovery Systems.
Procedure
Oil drain and filler plug on the oil separator vessel
Vent plug, oil cooler
Instruction book
156 2920 7180 30
To Next Page
Loading...
