Stop the compressor, switch off the voltage and carry out the required service actions. See section
Preventive Maintenance.
• The longer interval service actions must also include the shorter interval actions.
In the example above, carry out all service operations belonging to the 8000
running hours interval as well as those belonging to the 4000 running hours
interval.
• The setting of the service timer can be changed in function of the operating
conditions. See section Preventive Maintenance schedule.
After servicing, reset the service timer. See section Calling up/resetting the service timer
3.8 Scrolling through all screens
Control panel
Control panel
Scroll buttons (12) can be used to scroll through all screens. The screens are divided into register screens,
measured data screens, digital input screens (numbered as <d. in>, <d. 1>, ...), parameter screens
(numbered as <P. 1>, <P. 2>, ...), protections screens (numbered as <Pr. 1>,...) and test screens (numbered
as <t. 1>,...).
During scrolling, the numbers of the screens appear consecutively. For most screens, the unit of
measurement and the related pictograph are shown together with the screen number.
Example
The screen shows the screen number <d.1>, the unit used <hrs> and the related symbol for running hours.
Press Enter key (13) to call up the actual running hours.
Instruction book
36 2920 7180 30
To Next Page
Loading...
