The figures within the bars are the number of hours to go till the next service intervention. In the example
above, the compressor was just started up, which means it still has 4000 running hours and 8280 hours to
go before the next Service intervention.
Service plans
A number of service operations are grouped (called Level A, Level B, etc...). Each level stands for a
number of service actions to be carried out at the time intervals programmed in the Elektronikon
®
controller.
When a service plan interval is reached, a message will appear on the screen.
After carrying out the service actions related to the indicated levels, the timers must be reset.
From the Service menu above, select Service plan (3) and press Enter. Following screen appears:
Text on image
(1)
Service Plan
(2)
Level
(3)
Running hours
(4)
Real Time Hours
(5)
Modify
Modifying a service plan
Dependant on the operating conditions, it can be necessary to modify the service intervals. To do so, use
the Scroll keys to select the value to be modified. A screen similar to the one below appears:
Press the Enter key. Following screen appears:
Instruction book
2920 7180 30 89
To Next Page
Loading...
