Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Procedure
– Remove the engine cover. Refer to ⇒ Servicing – 4-Cylinder
1.8L; 2.0L 4V TFSI Engine; Rep. Gr. 10 ; Engine Cover; En‐
gine Cover, Removing and Installing .
– Remove the lock carrier cover. Refer to ⇒ Body Exterior; Rep.
Gr. 63 ; Front Bumper .
– Remove the bolts -arrows- and the air guide -2-.
– Loosen the hose clamps -arrows-.
– Remove the vacuum hose -2- and air duct pipe -1-.
– Install the -VAG1687/6- and -VAG1687/13-2- on the turbo‐
charger.
– Loosen the threaded connections -arrows- and slide the
clamping sleeves toward the rear.
Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
136 Rep. Gr.21 - Turbocharger, Supercharger
To Next Page
Loading...
