Audi A4 2015 - Coolant Pipes, Removing and Installing

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
13 - Coolant Hose
Overview - Transmission Coolant Pipes
1 - Coolant Hoses
2 - Coolant Hoses
3 - Bolt
❑ 9 Nm
4 - Transmission Coolant
Pipes
❑ Removing and instal‐
ling. Refer to
⇒ “3.3 Transmission
Coolant Pipes, Remov‐
ing and Installing”, page
116 .
5 - Bolt
❑ 9 Nm
3.2 Coolant Pipes, Removing and Installing
⇒ “3.2.1 Left Coolant Pipe, Removing and Installing”, page 112
⇒ “3.2.2 Right Coolant Pipe, Removing and Installing, Vehicles
without Particulate Filter”, page 113
⇒ “3.2.3 Right Coolant Pipe, Removing and Installing, Vehicles
with Particulate Filter”, page 115
3.2.1 Left Coolant Pipe, Removing and Instal‐
ling
Special tools and workshop equipment required
♦ Hose Clamps - Up To 25 mm - 3094-
♦ Hose Clip Pliers - VAS6340-
Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
112 Rep. Gr.19 - Cooling System