Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove the upper air duct -arrow-.
– Remove the left and right bolt -2- and push the radiator bracket
-1- with the bolt toward the front in direction of -arrow-.
– Release the left and right catches in direction of -arrows- and
remove the retaining pin -1- for the radiator upward.
– Push the radiator slightly forward.
– Remove the bolts -arrows- and remove the right drive axle
heat shield.
– Remove the left and right drive axles from the transmission.
Refer to ⇒ Suspension, Wheels, Steering; Rep. Gr. 40 ; Drive
Axle; Drive Axle, Removing and Installing .
– Remove the steering intermediate shaft from the steering gear
and push together. Refer to ⇒ Suspension, Wheels, Steering;
Rep. Gr. 48 ; Steering Column; Steering Intermediate Shaft,
Removing and Installing .
Audi A4 2015 ➤ , Audi A4 China 2016 ➤ , Audi A5 2016 ➤
4-Cylinder Direct Injection 2.0L 4V TFSI Engine (EA 888 Generation III) - Edition 11.2019
1. Engine, Removing and Installing 21
To Next Page
Loading...
