14
Replacing the detachable cable
The cable on the ATH-E40 is detachable. If there are signs of deterioration, replace the cable (sold separately).
Do not
detach the cable except when replacing it with a new cable.
➊ Headphone
➋ Cable
How to detach the cable
Hold the connector and pull straight out in the direction shown by the arrow.
How to attach the cable
Plug the left or right connector in as shown in the
figure until it clicks.
• The detachable connector is very delicate. Pulling at an angle or mounting at an angle will cause the
pins to bend, resulting in malfunction. Only pull or attach in a straight motion to prevent malfunction.
Wearing the headphones
1
Wear the headphones with the “L” (left) marked on the left ear and the “R” (right) marked on the right ear and
adjust the eartips.
2
Adjust the cable length with the cable adjustment slider.
To Next Page
Loading...
Need help?
General
