?
There is no voice / The voice level is low
• Check to see if the transmitter and receiver are on the same channel.
• Make sure the power button on the transmitter is not turned off.
• Confirm that the antennas are correctly connected.
• Make sure that RF OFF mode is on.
• Check to make sure that the transmitter is not disconnected from an external device such as a mixer.
• Confirm that the audio output isn't set to the minimum level.
• Check that the audio output volume of the mixer or other external device connected to the transmitter is not too
low.
?
Sound is distorted
• Confirm that the audio output level isn't too high.
• Confirm that the volume of any external device isn't too high.
?
There is unwanted noise
• Make sure there are no noise sources such as fluorescent lights or electrical equipment near the transmitter.
• Confirm that each transmitter is using a different frequency.
• Make sure that the transmitter and receiver antennas are not too close together.
• Check that the connections from the input/output jack of the transmitter are made properly.
• Make sure the transmitter is not powered from the same outlet as noisy equipment.
• Confirm that there isn't any other nearby wireless system using the same frequency band.
To Next Page
Loading...
Need help?
General
