EasyManuals Logo

AudioCodes Mediant 1000 Hardware Installation Manual

AudioCodes Mediant 1000
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
CHAPTER5 Cabling the Device
Mediant 1000 Gateway & E-SBC | Hardware Installation Manual
Figure 5-11: FXO Cabling for Outdoor Routing
5. Connect the FXO line from the MDF to the PBX/PSTN equipment.
Connecting the FXS Analog Lifeline Phone
The device supports Analog Lifeline. If the device loses power, for example, due to a power
outage or the unplugging of its power cable, it automatically routes calls from a POTS telephone
("lifeline" phone), connected to an FXS port, to the PSTN (instead of the IP network).
- 43 -

Table of Contents

Other manuals for AudioCodes Mediant 1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 1000 and is the answer not in the manual?

AudioCodes Mediant 1000 Specifications

General IconGeneral
Data link protocolsCAS: MF-R1: T1 CAS, ISDN PRI: ETSI/EURO ISDN, ANSI NI2, QSIG
Security algorithmsHTTPS, SRTP
Authentication methodRADIUS
Internal memory512 MB
Built-in processorCeleron 600 MHz
Processor frequency600 MHz
Internal memory type-
Number of processors installed1
Voice codecsG.711, G.723.1, G.726, G.729A, iLBC
SafetyUL60950-1, FCC 47 CFR
CertificationETS 300019-2-1, ETS 300019-2-2 ETS 300019-2-3
Mounting typeRack mounting
LED indicatorsYes
Power requirements90-260 V AC
Weight and Dimensions IconWeight and Dimensions
Size (imperial)19 \

Related product manuals