AUMA SAEx 07.2 User Manual

L
Language in the display 56
LED end position signalling 77
LEDs (indication lights) 63
Lifetime 96
Limit switching 69, 73
Line topology 33, 40, 45
Local actuator operation 51
Local control 51
Local controls 51
Local setting 52
Loop topology 35, 40, 45
Lubrication 92
M
Main menu 53
Mains frequency 11, 11
Mains voltage 11, 11, 25
Maintenance 6, 89, 92
Maintenance required - indic-
ation on display
62
Manual operation 50
Marking for explosion protec-
tion
12
Mechanical position indicator 64, 79
Menu navigation 52
Monitoring time 67
Motor heater 95
Motor operation 51
Motor protection 11, 94, 94
Motor type 11
Mounting position 101
N
Name plate 10
Non-Intrusive 8
Not ready REMOTE - indica-
tion on display
61
O
Operating the actuator from
local controls
51
Operation 5, 50
Operation commands - indic-
ations on display
60
Order number 10, 11, 13
Out of specification - indica-
tion on display
62
Output contacts 65
Output drive type A 18
Output drive types 18
Output drive types B 22
Output signals 65
Output signals Potential 26
Overload protection 50
P
Parity 67
Parking frame 49
Password 54
Password change 55
Password entry 55
Pollution degree 102
Positioner - indication on dis-
play
60
Position indicator 64, 79
Position transmitter 13
Position transmitter (EWG) 75
Position transmitter (RWG) 78
Potentiometer 77
Power class 11
Power class for switchgear 13
Power factor 11
Power supply of electronics 25
Production, year 13
Protection on site 25
Protective measures 6
Push-to-run operation 52
Q
Qualification of staff 5
R
Range of application 6
Rated current 11
Rated power 11
Recycling 92
reductions 26
Reference operation 73
Remote actuator operation 52
Residual current device
(RCD)
26
Running indication 64
RWG 78
114
SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 Control unit - electromechanical
Index ACExC 01.2 Intrusive Modbus RTU

AUMA SAEx 07.2 Specifications

General

Brand	AUMA
Model	SAEx 07.2
Category	Controller
Language	English