AUMA SAEx 07.2 User Manual

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Store operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Target group:
This document contains information for assembly, commissioning and maintenance staff.
Reference documents:
●
Manual (Operation and setting) of actuator controls ACExC 01.2 Modbus
●
Manual (Fieldbus device integration) of actuator controls ACExC 01.2 Modbus
Reference documents are available on the Internet at: http://www.auma.com.
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Prerequisites for the safe handling of the product
61.2. Range of application
71.3. Warnings and notes
71.4. References and symbols
82. Short description...................................................................................................................
103. Name plate..............................................................................................................................
144. Transport and storage...........................................................................................................
144.1. Transport
164.2. Storage
175. Assembly................................................................................................................................
175.1. Mounting position
175.2. Handwheel fitting
175.3. Mount actuator to valve
185.3.1. Overview of output drive types
185.3.2. Output drive type A
195.3.2.1. Multi-turn actuator with output drive type A: mount
215.3.2.2. Stem nut for output drive type A: finish machining
225.3.3. Output drive types B/C/D and E
235.3.3.1. Multi-turn actuator with output drive type B: mount
245.4. Accessories for assembly
245.4.1. Stem protection tube for rising valve stem
256. Electrical connection.............................................................................................................
256.1. Basic information
276.2. Overview of AUMA electrical connections
286.3. KT/KM electrical connection
296.3.1. Terminal compartment: open
306.3.2. Cable connection
336.3.3. Fieldbus cables: connect
336.3.3.1. Fieldbus connection for line topology
356.3.3.2. Fieldbus connection for loop topology
2
SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 Control unit - electromechanical
Table of contents ACExC 01.2 Intrusive Modbus RTU

AUMA SAEx 07.2 Specifications

General

Brand	AUMA
Model	SAEx 07.2
Category	Controller
Language	English