AUMA SAEx 07.2 User Manual

366.3.4. Terminal compartment: close
376.4. KP/KPH electrical connection
386.4.1. Terminal compartment: open
396.4.2. Cable connection
406.4.3. Fieldbus cables: connect
416.4.4. Terminal compartment: close
426.5. KES electrical connection
436.5.1. Terminal compartment: open
446.5.2. Cable connection
456.5.3. Fieldbus cables: connect
466.5.4. Terminal compartment: close
476.6. External earth connection
486.7. Accessories for electrical connection
486.7.1. Actuator controls on wall bracket
496.7.2. Parking frame
507. Operation................................................................................................................................
507.1. Manual operation
507.1.1. Manual valve operation
517.2. Motor operation
517.2.1. Operating the actuator from local controls
527.2.2. Actuator operation from remote
527.3. Menu navigation via push buttons (for settings and indications)
537.3.1. Menu layout and navigation
547.4. User level, password
557.4.1. Password entry
557.4.2. Password change
567.4.3. Timeout for incorrect password entry
567.5. Language in the display
567.5.1. Language change
588. Indications..............................................................................................................................
588.1. Indications during commissioning
588.2. Indications in the display
598.2.1. Feedback signals from actuator and valve
618.2.2. Status indications according to AUMA classification
628.2.3. Status indications according to NAMUR recommendation
638.3. Indication lights of local controls
648.4. Optional indications
648.4.1. Mechanical position indication via indicator mark
659. Signals (output signals).........................................................................................................
659.1. Status signals via output contacts (digital outputs)
659.1.1. Assignment of outputs
659.1.2. Coding the outputs
659.2. Analogue signals (analogue outputs)
6610. Commissioning (basic settings)...........................................................................................
6610.1. Type of seating: set
6710.2. Fieldbus address (slave address), baud rate, parity and monitoring time: set
6710.3. Open switch compartment
6810.4. Torque switching: set
6910.5. Limit switching: set
3
SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 Control unit - electromechanical
ACExC 01.2 Intrusive Modbus RTU Table of contents

AUMA SAEx 07.2 Specifications

General

Brand	AUMA
Model	SAEx 07.2
Category	Controller
Language	English