AUTEC Dynamic Plus Series User Manual

14
LIUDJR000_eng-00
Technical Data Sheet
AUTEC - Dynamic Plus series
5 Technical Data Sheet
The Radio Remote Control 's Technical Data Sheet:
- describes the Transmitting Unit's con󰘰guration,
- indicates the relation between commands sent by the Transmitting Unit and those available
on the Receiving Unit.
The Technical Data Sheet must be 󰘰lled in, checked and signed by the Installer, who is
responsible for correct wiring.
A Technical Data Sheet must always be kept together with this Manual: if you need to use
the Technical Data Sheet for administrative purposes (tests, check, etc.), make a copy of it.
The wiring of the Receiving Unit's outputs must always re󰄉ect the wiring
indicated in the Technical Data Sheet.
6 Plates
The DJR Transmitting Unit has the following plates:
Plate Position Content
Radio Remote Control
identi󰄈cation plate
Key ID 0-1 (if present)
Radio Remote Control serial number
(S/N)
Battery housing (if the
“ID internal tx memory” is
present)
Transmitting Unit
identi󰄈cation plate
Battery housing
Manufacturing year, bar code and
Transmitting Unit identi󰘰cation number
(TU ID)
Technical data plate Battery housing
MODEL, TYPE and main Transmitting
Unit technical data, marking and
possible Radio Remote Control marks

AUTEC Dynamic Plus Series Specifications

General

Brand	AUTEC
Model	Dynamic Plus Series
Category	Remote Control
Language	English