AUTEC - Dynamic Plus series
General operating instructions 23
LIUDJR000_eng-00
8.6 Low Power function
The LOW POWER function allows transmission at a lower power than the nominal power
and reduces the Radio Remote Control working range (see paragraph "Technical data" in
the general part of the Instruction Manual).
This function aims at:
- making it easier to work with several Radio Remote Control in the same working
environment (i.e.: many working Machines in the same working area)
- extending the battery run-time.
This function is established by the Machine Manufacturer (see Technical Data Sheet).
8.7 Battery
The Dynamic Plus series' Transmitting Units can only be powered by Autec
rechargeable batteries.
For warnings and instructions regarding the battery, see Battery Charger
manual.
8.7.1 Battery insertion
Push the battery towards the contacts on the Transmitting Unit (1) and insert it inside the
housing (2).
The battery slides easily into place and ensures that the positive (+) and negative
(-) poles are correctly connected only if it is inserted with the plate facing its
housing, so that the battery's contacts match the Transmitting Unit's contacts.
To Next Page
Loading...
Need help?
General
