AUTEC Dynamic Plus Series User Manual

AUTEC - Dynamic Plus series
General operating instructions 19
LIUDJR000_eng-00
8.4 Display
8.4.1 2.7” display
A
B
A 2.7” display
B DISPLAY pushbutton
DISPLAY pushbutton
The DISPLAY pushbutton on the Transmitting Unit is used to interact with the 2.7" display.
Functions carried out by the DISPLAY pushbutton are con󰘰gurable and chosen
by the Machine Manufacturer: the User must be properly trained about them.
No Machine operation or movement shall be connected to the use of the DISPLAY
pushbutton.
Symbol Meaning
This symbol identi󰘰es the DISPLAY pushbutton.

AUTEC Dynamic Plus Series Specifications

General

Brand	AUTEC
Model	Dynamic Plus Series
Category	Remote Control
Language	English