AUTEC Dynamic Plus Series User Manual

22
LIUDJR000_eng-00
General operating instructions
AUTEC - Dynamic Plus series
8.5.3 MOVEMENT SPEED SELECTOR
This switch is used to modify the speed of the Machine
movements.
Depending on the con󰘰guration:
- it sets two or three speed levels,
- it increases or decreases speed.
The levels and the speed increase and decrease are chosen
by the Machine Manufacturer.
Symbol Meaning
Depending on the con󰘰guration, this symbol indicates:
- the normal speed of the Machine movements or
- the increase of speed of the Machine movements.
Depending on the con󰘰guration, this symbol indicates:
- the reduced speed of the Machine movements or
- the decrease of speed of the Machine movements.
If this symbol is present, it indicates that the speed of the Machine movements is
further reduced.
8.5.4 Engine on/o󰓐 switch
This switch is used to switch on and o󰘯 a Machine's engine.
Symbol Meaning
This symbol indicates the power on command of a Machine's engine.
This symbol indicates the switch o󰘯 command of a Machine's engine.

AUTEC Dynamic Plus Series Specifications

General

Brand	AUTEC
Model	Dynamic Plus Series
Category	Remote Control
Language	English