AUTEC Dynamic Plus Series - Page 45

AUTEC - Dynamic Plus series
Malfunction signalled by the Transmitting Unit 45
LIUDJR000_eng-00
Examples
If the red LED shows ONE long blink and TWELVE short blinks, this means that the Transmitting
Unit detected that command D12 is activated.
If the red LED shows TWO long blinks and FIVE short blinks, this means that the Transmitting
Unit detected that command A5 is activated.
If the red LED shows THREE long blinks and TWO short blinks, this means that the Transmitting
Unit detected that command H2 is activated.
If the red LED shows FOUR long blinks and ONE short blink, this means that the Transmitting
Unit detected that command L1 is activated.