Need help?Do you have a question about the Autel EVO Max 4T and is the answer not in the manual?
General| Flight Time | 42 minutes |
|---|---|
| Transmission Range | 20 km |
| Obstacle Avoidance | Omnidirectional |
| Max Speed | 23 m/s |
| Operating Temperature | -10°C to 40°C |
| Aircraft Type | Quadcopter |
| Max Hovering Time | 38 minutes |
| Ingress Protection | IP43 |
| Camera | 48 MP |
| Thermal Camera Resolution | 640x512 |
| Digital Zoom | 16x |
| Battery Capacity | 8070 mAh |
| Charging Time | 90 minutes |
| Max Wind Resistance | 12 m/s |
| Operating Frequency | 2.4 GHz, 5.8 GHz |
| Sensor Size | 1/1.28 inch |
Overview of the EVO Max 4T's features, capabilities, and applications.
Provides step-by-step instructions for removing and installing the gimbal camera.
Explains the intelligent flight control system and its supported functions.
Introduces the Autel Smart Remote Controller V3, its screen, memory, and battery life.
How to check the remote controller's battery level and charge it.
Step-by-step instructions for pairing the remote controller with the aircraft.
Instructions for calibrating the remote controller if it shows abnormalities.
General instructions for operating the remote controller for flight.
Explains the function and modes of the command sticks for flight control.
Instructions for automatic takeoff, return-to-home, and pausing flight.
Introduces the rechargeable lithium polymer battery used in the EVO Max 4T.
Instructions for installing and removing the smart battery.
Instructions for charging the smart battery using the provided charger.
Overview of the Autel Enterprise App for flight control and mission planning.
How to access and navigate the main settings interface of the app.
Details on setting flight control parameters like altitude and distance limits.
How to configure obstacle avoidance system settings, stop distance, and warnings.
Settings related to the remote controller, including stick modes and button customization.
How to view aircraft battery status and set alarm thresholds.
Settings for gimbal pitch sensitivity, calibration, and adjustment.
Introduction to route missions and the mission toolbox.
How to create and manage waypoint missions for autonomous flight.
Guidance for users before their initial flight with the aircraft.
Essential precautions to ensure safe flight operations.
Detailed safety guidelines for flying the aircraft in various environments.
Steps to prepare the aircraft and accessories before flying.
Instructions for charging the aircraft battery and remote controller.
Detailed guide on how to install and remove the aircraft's propellers.
Process for initial product activation, login, and pairing.
Comprehensive checklist for pre-flight inspections to ensure safe operation.
Steps for initiating and conducting basic flight operations.
Instructions for manual and automatic takeoff and landing of the aircraft.
Information on downloading and updating the aircraft and controller firmware.
Procedures for calibrating aircraft equipment like the compass.
Detailed specifications for the EVO Max 4T aircraft, including weight, dimensions, and performance.
Detailed specifications for the Autel Smart Controller V3.
Detailed specifications for the aircraft's smart battery.
To Next Page
