Need help?Do you have a question about the Autel Alpha and is the answer not in the manual?
Overview of the Autel Alpha aircraft's features, including its processing chip, sensing systems, and flight time.
Details the contents included within the product's rugged case for storage and transportation.
Provides an introduction to the Unmanned Aerial System (UAS), including aircraft components and payload.
Advises on critical guidelines for operating the aircraft safely and legally, avoiding consequences and violations.
Specifies essential requirements for the flight environment, including weather conditions and take-off/landing areas.
Explains the aircraft's obstacle avoidance system, comprising visual and millimeter-wave radar sensing.
Details the visual obstacle avoidance function, its suitability, and limitations during flight.
Outlines precautions for using obstacle avoidance systems, considering factors like light and surface texture.
Describes the aircraft's auto-return function, including activation methods and behavior.
Explains how the auto-return process integrates obstacle avoidance during return flights.
Details the landing protection function that assesses ground suitability before landing.
Covers flight restrictions and the process for unlocking restricted zones using the geofencing system.
Introduces the geofencing system for ensuring safe and legal flights by managing airspace restrictions.
Explains the geofencing system's division of airspace restrictions into categories like no-fly zones.
Guides on performing essential aircraft calibrations, including compass and IMU.
Provides step-by-step instructions for calibrating the aircraft's compass.
Details the process for calibrating the aircraft's Inertial Measurement Unit (IMU).
Explains how to calibrate the aircraft's gimbal if its rotation angle is abnormal.
Describes the function to emergency stop propellers to mitigate damage during malfunctions.
Outlines the standard process for operating the aircraft, including pre-flight checks.
Provides a comprehensive checklist to ensure flight safety before each flight.
Details the basic steps for operating the aircraft, including take-off and landing.
Guides on activating the Autel Alpha aircraft for the first time before use.
Details the various components of the Autel Alpha aircraft, with views and descriptions.
Covers essential preparation steps for the aircraft before flight operations.
Provides instructions on how to replace the aircraft's propellers.
Explains the procedure for folding and unfolding the aircraft's arms for storage and deployment.
Details the aircraft's camera system, including its structure and capabilities.
Describes how to operate the camera using the remote controller and Autel Enterprise App.
Explains how to operate the gimbal using the remote controller.
Provides instructions on how to replace the aircraft's removable gimbal.
Details the intelligent flight control system and its supported functions.
Explains the different flight status modes (GNSS, Visual Positioning, ATTI) the aircraft can switch between.
Describes the various flight modes available for the aircraft, affecting its performance.
Covers intelligent flight functions like accurate landing, landing protection, and obstacle avoidance.
Details the Autel SkyLink 3.0 image transmission technology and its capabilities.
Identifies and describes the components of the Autel Smart Controller V3.
Explains the procedure for turning the remote controller on and off.
Guides on how to check the remaining battery level of the remote controller.
Details how to charge the remote controller using the provided charger.
Provides guidance on adjusting the remote controller's antenna for optimal signal quality.
Describes the various interfaces and main screen of the remote controller.
Details the main interface of the Autel Enterprise App on the remote controller.
Explains how to access and use the shortcut menu for quick settings.
Covers the process of pairing the remote controller with the aircraft.
Details frequency pairing using the Autel Enterprise App.
Explains the different stick modes (Mode 1, 2, 3) available for aircraft control.
Describes the function of each stick in different control modes.
Guides on how to set the preferred stick mode for aircraft control.
Details the functions of various keys on the remote controller, including custom buttons.
Explains how to customize the functions of the C1 and C2 keys.
Describes the functions of the take-off/return-to-home and pause buttons.
Provides instructions for calibrating the remote controller if it is abnormal.
Details the various functions of the smart battery, including self-heating and power saving.
Covers safe usage practices for the smart battery, including temperature and environmental considerations.
Provides step-by-step instructions for installing and removing the smart battery.
Explains how to check the smart battery's level using the indicator status.
Details the process of charging the smart battery using the official charger.
Describes the main interface of the Autel Enterprise App after pairing the controller.
Explains the details of the status notification bar in the Autel Enterprise App.
Details the shortcut toolbar for quick access to frequently used functions.
Covers the settings interface for configuring flight control, OA, RC, and other parameters.
Guides on setting flight control parameters like RTH Altitude, Altitude Limit, and Flight Mode.
Details the settings for the Obstacle Avoidance (OA) system, including brake distance and OA mode.
Covers RC settings such as stick mode, custom buttons, and EXP calibration.
Explains settings for image transmission mode, frequency band, and split screen effect.
Details battery information, including setting warning thresholds and enabling hot swap.
Covers gimbal settings like pitch sensitivity, extended pitch angle, and calibration.
Describes the different camera interfaces available in the Autel Enterprise App.
Details the camera function area for switching cameras and adjusting settings.
Explains the interface for the zoom camera, including adjusting zoom factor.
Details the thermal camera interface, including color palettes and measurement modes.
Explains the wide angle camera interface and how to adjust its zoom factor.
Introduces different types of flight missions: waypoint, rectangle, and polygon.
Guides on creating and managing waypoint missions, including adding waypoints and actions.
Explains how to set up and execute rectangle missions for aerial surveys.
Details how to create and execute polygon missions for aerial surveys.
Outlines the pre-flight check process before starting a mission.
Guides on updating the firmware for the aircraft and remote controller via the Autel Enterprise App.
Provides solutions for common issues encountered with the aircraft and remote controller.
Lists detailed technical specifications for the Autel Alpha aircraft.
Provides technical specifications for the DG-L35T gimbal camera.
Lists detailed technical specifications for the Autel Smart Controller V3.
Provides detailed technical specifications for the Autel Alpha smart battery.
To Next Page
General
