Autel Alpha - 6.5.5 Aircraft Battery

Chapter 6 Autel Enterprise App 113
Tip

“Smooth” means 720P and "HD" means 1080P.
 Set Transmission Frequency Band
Tap the drop-down list of "Transmission Frequency Band" and select a transmission frequency
band according to your needs.
 Auto: The optimal transmission frequency band is automatically selected for image
transmission between the aircraft and the remote controller.
 2.4G: The 2.4 GHz frequency band is used for image transmission between the aircraft and
the remote controller.
 5.8G: The 5.8 GHz frequency band is used for image transmission between the aircraft and
the remote controller.
 Set Split Screen Effect
Tap the drop-down list of "Split Screen Effect", and select “Uniform Scale” or “Fit the Screen”
according to your needs.
 Uniform Scale: In dual-screen mode, the image transmission screen is proportionally reduced.
 Fit the screen: In dual-screen mode, the image transmission screen is stretched to cover the
screen.
Tip

The split screen effect settings are only effective when the remote controller is in dual-
screen mode.
Aircraft Battery
In the sidebar of the “Settings” interface, tap the " " icon to enter the "Battery Information"
interface, where you can view the basic information of the current aircraft battery (that is, smart
battery), set the battery warning threshold, and enable the hot swap battery function, as shown
below.