Autel Alpha - Appendix B Declaration of Conformity

170 Appendix B Declaration of Conformity
Appendix B Declaration of Conformity
Declaration of Conformity
Product:
Autel Alpha
Model Number:
MDH
Manufacturer’s Name:
Autel Robotics Co., Ltd.
Manufacturer’s Address:
601,701,801,901, Block B1, Nanshan iPark, No. 1001 Xueyuan
Avenue, Nanshan
District, Shenzhen, Guangdong, 518055, China
We, Autel Robotics Co., Ltd., declare under our sole responsibility that the above referenced product is in
conformity with the applicable requirements of the following directives:
RED Directive:
2014/53/EU
RoHS Recast Directive:
2011/65/EU
UAS Delegated Regulation:
2019/945/EU 2020/1058/EU
Machinery Directive:
Annex I 2006/42/CE
Conformity with these directives has been assessed for this product by demonstrating compliance
to the following harmonized standards and/or regulations:
Safety
EN IEC 62368-1:2020+A11:2020
EMC
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-3 V2.3.2 (2023-01)
ETSI EN 301 489-17 V3.2.4 (2020-09)
ETSI EN 301 489-19 V2.2.1 (2022-09)
EN 55032:2015+A11:2020+A1:2020
EN 55035:2017+A11:2020
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021
Radio
ETSI EN 300 328 V2.2.2 (2019-07)
ETSI EN 301 893 V2.1.1 (2017-05)
ETSI EN 300 440 V2.2.1 (2018-07)
ETSI EN 303 413 V1.2.1 (2021-04)
ETSI EN 303 213-5-1 V1.1.1 (2020-03)
ETSI EN 305 550-1 V1.2.1 (2014-10)
ETSI EN 305 550-2 V1.2.1 (2014-10)
Health
EN IEC 62311:2020
EN 50665:2017
RoHS
2011/65/EU
UAS Delegated Regulation
prEN 4709-001: 03.2023 with D5 WG8
prEN 4709-002: 02.2023 with Edition P 1, February 2023