98 Chapter 5 Smart Battery
Please be noted that according to airline requirements, lithium batteries over 160Wh
cannot be carried on board.
Before storing or transporting the smart battery, please turn off the battery.
Store the smart battery out of the reach of children and pets.
Store the smart battery away from direct sunlight, water, or reactive chemicals.
Do not expose the smart battery to open flame, explosives, or other hazards.
Do not store the smart battery in extreme temperatures. Otherwise, the lifespan of the
battery may be shortened and the battery may even become damaged or ineffective. If the
battery is not used for more than 1 day, it should be stored below 30 ℃
temperature).
Do not place the smart battery in a microwave or pressure cooker.
Do not place the smart battery directly on conductive surfaces (such as metal shells or
panels).
Do not place heavy objects on the smart battery. When subject to an external force, the
battery may be damaged or even catch fire or explode.
Do not store or transport the smart battery with sharp objects, watches, metal necklaces,
earrings, or other metal items.
Do not transport batteries that have a damaged appearance or a battery level of more than
30%.
If the smart battery is left idle for a long time, please charge it every three months to avoid
a shortened battery lifespan resulting from long-term low battery levels.
Maintaining and Handling the Smart Battery
Maintaining the Smart Battery
In order to maintain the activity of the smart battery of the aircraft, it is recommended to
perform battery maintenance if any of the following conditions are met:
It is recommended to perform battery maintenance for the smart battery every 50 times of
battery cycle.
The idle time of the smart battery reaches 3 months.
Occasionally, there are situations that affect the lifespan of the smart battery. In this case,
you can try maintenance and repair.
The Autel Enterprise App reminds you when the smart battery needs maintenance.
The following battery maintenance check items are available for the smart battery:
1. Perform a standard charge and discharge operation on the smart battery.
2. Insert the smart battery into the aircraft and turn on the power. Check the battery information
through the Autel Enterprise App, whether the voltage difference between the battery cells is
less than 0.1 V, and whether the battery firmware is up to date.
3. Check whether the smart battery is bulged, leaked, or damaged.
To Next Page
Loading...
