Chapter 5 Smart Battery 93
Remove the Smart Battery
When the battery unlock levers cannot be rotated, please do not press them hard to avoid
any possible damage to the internal structure of the aircraft.
Battery Hot Swap
1. When the aircraft is powered on and the motors are not activated, you can perform a hot swap
of the batteries.
2. Move the battery unlock lever on either side of the aircraft's battery compartment, take out
the smart battery, and then quickly insert a fully charged battery.
3. After all the battery level indicators of the newly replaced battery turn on, repeat the above
steps to replace the smart battery on the other side.
Checking Battery Level
When the smart battery is off, short press the battery power button for 1 second to check the
current battery level through the battery level indicator status.
Checking Battery Level
To Next Page
Loading...
