Chapter 7 Firmware Updates and Maintenance 151
Firmware Updates and Maintenance
In order to ensure the reliability and overall performance of the aircraft and relevant parts, as
well as to obtain the best flight experience, the aircraft, remote controller, and parts need to be
updated to the latest firmware version.
Use the Autel Enterprise App to perform firmware updates for the aircraft, remote controller,
smart battery, and other parts.
Online updates require that the remote controller can access the internet.
Aircraft and Remote Controller Firmware Updates
1. Power on the remote controller and aircraft. Make sure that the aircraft and remote controller
are already paired, both have a battery level of more than 25%, and the network connection
of the remote controller is normal.
2. Open the Autel Enterprise App. If there is a version update available, you will receive a pop-
up notification on the main interface of the App or you can manually select the update in the
settings of the App.
3. Tap "Update All", and the Autel Enterprise App will automatically download and update the
firmware for the remote controller and aircraft.
4. After the update is complete, follow the pop-up instructions to restart the remote controller
and aircraft.
During the update process, do not power off the aircraft and keep it connected to the
remote controller.
The update process is expected to take about 15 minutes (depending on the network that
the remote controller is connected to).
Do not move the command sticks before and after the update to ensure that the propellers
remain stationary.
Make sure that the aircraft and remote controller have sufficient storage space for the
firmware update packages.
During the update process, the firmware of the smart battery MDH_10000_23700 will also
be updated to the latest version.
To Next Page
Loading...
