70 Chapter 4 Remote Controller
Installing command sticks
Storing Command sticks
Simply follow the reverse steps of the above operation.
When the command sticks are not in use (such as during transportation and temporary
aircraft standby), we recommend that you remove and store them on the metal handle.
This can prevent you from accidentally touching the command sticks, causing damage to
the sticks or unintended startup of the aircraft.
Turning the Remote Controller On/Off
Turning the Remote Controller On
Press and hold the power button at the top of the remote controller for 3 seconds until the
controller emits a "beep" sound to turn it on.
Turning the Remote Controller On
To Next Page
Loading...
